|
Product Details:
|
| Wavelength: | 635~650nm | Power Supply: | 24VDC |
|---|---|---|---|
| Signal Output: | 4...20mA/RS485 | Laser Transmit Power: | ﹤1mW |
| Process Connection: | Thread、flange (optional) | Process Temperature: | -30~+70℃; -30~+80℃ |
| Typical Application: | Gas Tank Counter Detection, Piston Balance Monitoring, Etc. | Electrical Interface: | M20×1.5, ½ "NPT |
| High Light: | 24VDC Radar Level Transmitter,Flange Radar Type Level Transmitter,650nm Gas Radar Level Instrument |
||
Long-Distance And High-Precision 24VDC NYTOFUL Lidar Object Level Meter
NYTOFUL Lidar Object Level Meter Description
Radar Level Transmitter is high-frequency level measurement instruments with the maximum measuring distance up to 70 meters. The antenna is further optimized, and the new-type microprocessor can perform higher rate of signal analysis and processing, making the instrument available for complex measurement conditions, such as reactors,solid silos.
NYTOFUL Lidar Object Level Meter Working Principle
Radar Level Antenna emits narrow microwave pulses that transmitted down by the antenna. The microwave comes into contact with the measured medium surface then reflected back and receiving by the antenna system. The signal is transmitted to electronic circuit and partly concert to level signals as a the microwave featured with high propagation speed, it's almost instantaneous for the electromagnetic waves to reach the target and return to the receiver.
NYTOFUL Lidar Object Level Meter Technical Parameters
| Typical application | Gas tank counter detection, piston balance monitoring, etc. |
| Laser class | Ⅱlevel |
| Wavelength | 635~650nm |
| Power supply | 24VDC |
| Signal output | 4...20mA/RS485 |
| Measuring accuracy | ±1mm |
| Laser transmit power | ﹤1mW |
| Process connection | Thread,flange (optional) |
| Process temperature | -30~+70℃; -30~+80℃ |
| Electrical Interface | M20×1.5, ½ "NPT |
| Protection grade | IP65, IP67, IP68 |
NYTOFUL Lidar Object Level Meter Design Feature
1. Long-distance and high-precision: the range can be set freely, the ranging accuracy is ±1mm, and the measuring range (0.001-150m).
2. Simple operation mode: continuous measurement, measurement time interval can be set.
3. Digital output and analog output: At the same time, it has RS485 standard MODBUS protocol, 4-20mA output, and two sets of programmable switch output.
4. Protection class: IP67 (to prevent dust and water vapor).
5. Low power consumption, wide power supply range.
6. Explosion-proof design EXdIIBT4, CT6 optional, can be used in hazardous environments.
7. The temperature range is -30°C to +70°C without the high temperature isolation device, and -30°C to +200°C after the high temperature isolation device is added.
Contact Person: Winnie
Tel: 17392588557
