|
Product Details:
|
| Typical Application: | Tank-side Display And Control | Case Material: | Cast Aluminum, Stainless Steel (optional) |
|---|---|---|---|
| Power Supply: | 24VDC, 220VAC | Environment Temperature: | -40~+80℃ |
| Process Pressure: | -0.1~2.0MPa | Process Connection: | Flange,thread (optional) |
| Relative Humidity: | ≤95%RH | Signal Output: | DPDT Relay Output |
| High Light: | Tank Side Display Radar Level Transmitter,Control Radar Liquid Level Sensor 2.0MPa,Flange Radar Level Transmitter |
||
Flexible Application Tank-Side Display And Control NYZK Tank Side Display
NYZK Tank Side Display Working Principle
NYGP type tank side display meter (hereinafter referred to as "display meter") is mainly used to output 4-20mA without digital display or with digital display but not easy to observe the auxiliary display of the field instrument.
The display instrument should be installed in the easy-to-observe location next to the tank, so that it is convenient to observe the use of nearby.
NYZK Tank Side Display Technical Parameters
| Typical application | Tank-side display and control |
| Case Material | Cast aluminum, stainless steel (optional) |
| Display method | 128 x 96 dot matrix LCD display parameters and units can be set as required |
| Power supply | 24VDC, 220VAC |
| Environment temperature | -40~+80℃ |
| Relative Humidity | ≤95%RH |
| Process pressure | -0.1~2.0MPa |
| Process connection | Flange,thread (optional) |
| Protection level | IP66 |
| Explosion-proof grade | Exd II CT6 Gb,Exia II CT6 |
| Signal output | DPDT relay output |
NYZK Tank Side Display Design Feature
1. Directly serialized into 4-20mA circuit, no need for external power supply.
2. Dot matrix LCD display, capable of displaying different parameter names and units, flexible application.
3. Membrane keys, convenient for setting parameters in close proximity.
4. Suitable for use with instruments outputting 4 to 20mA.
5. With Exd II CT6/Exia II CT6 explosion-proof performance, it can be used in various flammable and explosive areas such as Zone 0 (must be powered by safety grid), Zone 1, Zone 2, etc.
Contact Person: Winnie
Tel: 17392588557
