CASES

2026-01-19

Application of RF Admittance Level Switch in Fly Ash Level Detection of Distilleries

To meet the emission standards for fly ash and flue gas generated by coal combustion, a large distillery added pulse bag filters during its technological transformation. The key feature of these filters is using high-pressure air to blow dust off the filter bags via pulse valves, collecting the dust ...

2026-01-12

Winter Anti-freezing and Anti-condensation Plan for Instrument Workshop

Anti-freezing and Anti-condensation Measures Proper Selection When selecting instruments, full consideration should be given to their anti-freezing and anti-condensation performance. Instruments with thermal insulation and tracing, as well as isolation tanks, should be chosen based on working ...

Latest company Cases about Why Do Instruments Undergo

2026-01-05

Why Do Instruments Undergo "Aging" Before Leaving the Factory?

The aging process of instruments before leaving the factory (also known as "pre-aging" or "burn-in") is a process step where manufacturers conduct continuous power-on, loading, or operation of the instruments for a period of time by simulating actual usage environments and working conditions, so as ...

2025-12-22

Application Media and Occasions of Capsule Pressure Gauges and Diaphragm Pressure Gauges

Application Media and Occasions Capsule Pressure Gauges Suitable for measuring micro-pressure and negative-pressure gases that are non-corrosive to copper alloys and free of explosion hazards. Widely used in equipment such as boiler ventilation systems, gas pipelines, and combustion devices. It ...

2025-12-19

Which Instruments Require Temperature and Pressure Compensation?

01 Overview of Temperature and Pressure Compensation Temperature and pressure compensation refers to a technology where instrument measurement data is automatically corrected using calculation formulas based on on-site temperature and pressure measurements, with the reference standard set at 25℃ and ...

2025-12-15

Do Double-Flange Capillary Tubes Require Thermal Insulation?

01 Generally, Thermal Insulation Is Not Needed Under normal environmental conditions, the filling fluid (such as silicone oil) inside the double-flange capillary tube has good temperature adaptability and can cope with daily temperature changes normally. At this time, no additional thermal ...

2025-12-12

Basic Differences Between Capsule Pressure Gauges and Diaphragm Pressure Gauges

Although capsule pressure gauges and diaphragm pressure gauges differ by only one Chinese character, they are two distinct types of pressure measuring instruments with significant differences in structure, working principle, applicable media, and application scenarios. 1. Working Principle Capsule ...

2025-11-25

Correct Selection Method for Vortex Flow Meters

Three-Step Strategy Step 1: Determine the Minimum Flow Rate Based on the actual medium operating conditions, calculate and confirm the minimum flow rate required for measurement. This is the foundation to ensure the normal operation of the flow meter. Step 2: Determine the Maximum Flow Rate Combined ...

2025-11-24

Connections Between Liquid Level Series Instruments

Liquid Level Series Category Specific Types Liquid Level Switches Contact type: Float type liquid level switch, electronic liquid level switch, pressure type liquid level switch, radio frequency admittance liquid level switch, capacitive liquid level switch, tuning fork type liquid level switch ...

2025-11-20

Mismatch Between Process Pipe Diameter and Actual Flow Rate of Vortex Flow Meters

In actual industrial production, mismatches between process pipe size and actual flow rate are common: Design redundancy: Pipes are over-sized during process design, while the actual operating flow rate is small. Capacity changes: Reduced production scale leads to decreased flow rate. Impact of ...

2025-11-18

Knowledge Sharing | Connections Between Pressure Switches, Pressure Sensors, and Pressure Transmitters

Pressure Series Category Specific Types Pressure Switches Mechanical pressure switchesDifferential pressure switches Pressure Sensors Electronic pressure sensors (strain gauge type, ceramic piezoresistive type, ceramic capacitive type, flat membrane type, diffused silicon type),Electronic differenti...

2025-11-17

Analysis of Common Misconceptions in Vortex Flow Meter Selection

01 Misconceptions in Vortex Flow Meter Selection Why can't we "choose the instrument caliber based on the pipeline size"?Process pipeline size ≠ flow meter caliber—this detail is crucial to the measurement accuracy of the entire system. In industrial production processes, flow measurement serves as ...

Radar Level Transmitter

Ultrasonic Level Transmitter

Magnetic Level Transmitter

RF Admittance Level Transmitter

Magnetostrictive Level Gauge

Pressure Sensor Transmitter

Temperature Transmitter Sensor

Electromagnetic Flow Meter

Mass Flow Meter

Ultrasonic Flow Meter

Turbine Flow Meter

Tuning Fork Level Switch

RF Admittance Level Switch

Rotary Paddle Level Switch

Microwave Level Switch

External Liquid Level Switch

Tuning Fork Density Meter

Radar Level Transmitter

Ultrasonic Level Transmitter

Magnetic Level Transmitter

RF Admittance Level Transmitter

Magnetostrictive Level Gauge

Pressure Sensor Transmitter

Temperature Transmitter Sensor

Electromagnetic Flow Meter

Mass Flow Meter

Ultrasonic Flow Meter

Turbine Flow Meter

Tuning Fork Level Switch

RF Admittance Level Switch

Rotary Paddle Level Switch

Microwave Level Switch

External Liquid Level Switch

Tuning Fork Density Meter