Product Details:
|
Typical Application: | Pipe Density Measurement | Product Model: | NYDE-CR |
---|---|---|---|
Measuring Range: | 0.5~2.5g/cc(500-2500kg/m³) | Calibration Range: | 0.5~2.5g/cc(500-2500kg/m³) |
Signal Output: | RS485 Modbus | Shell Material: | Cast Aluminum |
Operating Temperature: | - 50 ~ + 200 ℃ | Maximum Working Pressure: | 207bar(3000psi) |
Highlight: | Smart Tuning Fork Density Meter,RS485 Pipeline Tank Density Meter,Insertion Fork Density Meter |
Smart Tuning Fork Density Meter Desity Detection Pipeline Tank
Tuning Fork Density Meter Discription
NYDE-CR type insertion density meter can perform density detection online in real time. It can be used for process control of products based on density or for quality control based on percent solids or percent concentration. With plug-in installation, it is widely used in pipelines, medium density detection in open tank containers and closed tank containers. The fluid density directly depends on the vibration frequency received by the tuning fork in the medium inserted by the sensor.
Tuning Fork Density Meter Design Feature
◎Microprocessor-based electronic conversion device, which integrates signal processing, calculation and diagnostic functions.
◎It can communicate directly with the PC through the RS485 interface, and the user can directly perform online node configuration, fault diagnosis and data recording.
◎Excellent overload pressure protection structure, excellent temperature stability, fully welded sealing, and robust and reliable design.
Contact Person: Jero
Tel: 15901050329