|
Product Details:
|
| Typical Application: | Powder And Small Particle Level Control | Power Supply: | 24VDC，220VAC |
|---|---|---|---|
| Process Temperature: | -40~+80℃（>+80℃can Be Customized） | Process Pressure: | Atmospheric Pressure |
| Process Connection: | Screw Thread、flange（optional） | Medium Density: | ≥0.4g/cm3 |
| Levels Of Protection: | IP67 | Explosion-proof Grade: | ExiaIICT6 （See Certificate For Details） |
| High Light: | Shovel Blade Rotary Paddle Level Switch,High Temperature Rotary Paddle Switch,Atmospheric Pressure Paddle Level Sensor |
||
Shovel Blade Rotary Paddle Level Switch For High Temperature
Working principle of Shovel Blade Rotary Paddle Level Switch For High Temperature
The rotary material level switch is based on the principle of electromechanical potential control and uses a micro motor as a driving device to work. The drive shaft is connected with the clutch. When the material is not in contact with the material, the motor runs normally. When the blade contacts the material, the motor stops rotating and cuts off the motor power by itself. At the same time, the detection device outputs a contact signal to control the conveying of the material.
Design Features of Shovel Blade Rotary Paddle Level Switch For High Temperature
◎ unique oil seal design can prevent dust from penetrating along the shaft;
◎The motor of imported resistance rotary switch has reliable performance, and double sealed bearings can ensure long-term continuous operation;
◎ Simple structure and convenient installation;
◎ stable and reliable, and the torque can be adjusted;
◎ a variety of probe forms can be applied to different occasions.
Technical Parameters of Shovel Blade Rotary Paddle Level Switch For High Temperature
| Typical application | small particle level control |
| product model | NYZX |
| Probe Rod Material | 304(optional) |
| Probe Rod Length | 100mm(The length can be customized according to the site conditions) |
| Power Supply | 220VAC |
| Process Temperature | -40~+80℃(>+80℃can be customized) |
| Process Pressure | room pressure |
| Process Connection | flange(optional) |
| Electric shock capacity | 250V 5A(SPDT Single pole double throw) |
| Medium density | ≥0.4g/cm3 |
| moment of force | 10kg.m(1N.m) |
| Insulation impedance | ≥100MΩ(500VDC) |
| levels of protection | IP67 |
| Explosion-proof grade | Exia II CT6(See certificate for details) |
※Note:The product can be customized according to the specific requirements of user
Contact Person: Anna Zhang
Tel: 15021679084
